|
Special 1506SM Mining
Grader |
| |
| Special mining grader with a shorter frame and drawbar
and no tilt kit. Extra heavy rear counterweight. Optional
foam-filled tyres, hydraulically-actuated drawbar and
single tyne extension for working close to walls. |
|
|
|
Grader Specifications
- Five hydraulic release grader blades with notched edges.
- Two hydraulic release spreader blades on rear.
- Four pairs of compaction tyres for packing down graded surface.
- Two (2) 3” x 8” lift cylinders.
- One (1) 5” x 4” Phasing cylinder to provide level lift.
- Five (5) 2” x 6” hydraulic displacement cylinders.
- Two (2) 1¼” x 110mm hydraulic displacement cylinders.
- Pressure gauge and pressure relief valve.
- One (1) 4 litre (1 gal) nitrogen accumulator.
- Two (2) Hydraulic hoses for connection to remote hydraulics.
- Manual safety lock for transport.
- Weight: 3.2 tonnes approximately.
- Length: 5m (16ft)
- Width: 2.4m (8ft)
|
|
