Back to Grader Models

1510 High speed firebreak grader
 
The Model 1510 can be widened to grade 3.6 metres (12’) in one pass. It has four grader blades on extension beams that are moved out for operating and moved back in for a transport width of 2.4 metres.

This grader can be used to grade firebreaks, widen out existing tracks, smooth rough roads and build new formations. With nine independent angled blades, working either at 2.4, 3.0 or 3.6 metre wide, this grader can be very aggressive in loosening up hard surfaces. Requires about 200 HP tractor with Front Wheel Assist. 


Grader Specifications

  • Nine hydraulic release grader blades
  • Two hydraulic release spreader blades on rear.
  • Four pairs of compaction tyres for packing down graded surface.
  • Two (2) 3” x 8” lift cylinders.
  • One (1) 5” x 4” 
  • Phasing cylinder to provide level lift.
  • Nine (9) 2” x 6” hydraulic displacement cylinders.
  • Two (2) 1¼” x 4½" hydraulic displacement cylinders.
  • Pressure gauge and pressure relief valve.
  • One (1) 4 litre (1 gal) nitrogen accumulator.
  • Two (2) Hydraulic hoses for connection to remote hydraulics.
  • Manual safety lock for transport.
  • Weight: 3.2 tonnes approximately.
  • Length: 7m (23ft)
  • Working Width: 3.6m (12ft)
  • Transport Width: 2.4m (8ft)
 

Back to Grader Models